What is the normal speed of a small excavator when working?

The engine speed of a small excavator is affected by many factors,such as engine power,workload,ambient temperature,altitude,etc.Under normal working conditions,the engine speed of a small excavator must fully consider the influence of these factors.

Suitable range of engine speed for small excavator

Normally,the engine speed of a small excavator should be controlled within the range of 1500-2200r/min.This range is based on the comprehensive consideration of the engine power and workload of the small excavator.

Among them,for small excavators,speeds below 1000r/min will make it difficult to start the machine,while speeds above 2500r/min will cause the machine to produce excessive noise,wear out too quickly,and shorten the service life of the machine.

How to adjust engine speed of small excavator

The engine speed of a small excavator can be controlled by adjusting the accelerator pedal,fuel injection volume and resistance.It is recommended that users check the engine speedometer before starting the engine to ensure it is within a safe range.

Precautions for mini excavator engine speed

1.When starting the engine,pay attention to the speed not being too low,so as not to affect the starting and oil-air mixing.

2.When working,the workload of the machine must be fully considered and the engine speed should be reasonably controlled.

3.Regularly inspect and maintain the machine to ensure its normal operation.

4.Do not work continuously under harsh conditions such as high temperature and high altitude to avoid excessive load on the machine.

The engine speed of a small excavator is one of the key factors affecting the machine's efficiency and lifespan.Understand the appropriate range of engine speed for small excavators.By controlling the engine speed,you can effectively improve the machine's working efficiency and extend its service life.Therefore,when using a small excavator,users need to fully understand the relevant knowledge and reasonably adjust the engine speed to ensure the normal operation of the machine and extend the service life of the machine.